You got Leap questions? We got Leap answers! This article goes over commonly asked questions in regards to the updated Xtracycle FreeRadical Leap conversion kit. To easily search this article, we recommend using your keyboard's "find" function to search for keywords that pertain to the question you have. FAQ questions covered are:
- What is the Xtracycle Leap?
- What is the Xtracycle Leap rack made out of?
- Will the Leap work on my bike?
- Are there multiple versions of the Leap for different wheel sizes?
- Can I ride this off road and/or use touring?
- Does the Leap work with Xtracycle's child-carrying accessories?
- Can I put a child seat on the rack?
- What are the best bags for my Leap?
- Does the Leap work with the Xtracycle SideCar?
- Is the chain extension included with the Leap kits?
- My bike has V-brakes / cantilever brakes. Can I still install a Leap kit?
- Does the Leap support 20" wheels?
- If I want to take my 26" mountain bike and put the Leap on, but convert the rear wheel to 20", would there be any issues with that?
- Is the angle of the cargo deck shown on www.xtracycle.com/leap directly related the the chain stay angle?
- Does the Leap assume a certain BB Drop / CS angle?
- Looks like it's been designed for a mid sized wheel (26"?) and anything smaller or larger will slope the deck aft/fore respectively
- Are frames with a 130mm dropout spacing compatible?
- What is the make/model of the pictured bike on the Leap product page?
- Will the Leap be compatible with kids safety seats, like the Yepp?
- Will the Kickback on my FreeRadical work with the Leap?
- How far will the Leap extend my bike's wheel base?
1. What is the Xtracycle Leap?
The Leap converts virtually any adult bike into a longtail cargo bike capable of carrying almost anything: passengers, groceries, or anything else you dream up.
2. What is the Xtracycle Leap rack made out of?
The Leap is made out of steel, and is exceptionally strong and torsionally rigid.
3. Will the Leap work on my bike?
The Leap will work on most adult bikes. Please download the compatibility guide for more details.
4. Are there multiple versions of the Leap for different wheel sizes?
5. Can I ride this off road and/or use touring?
Yes, the Leap is great for both!
6. Does the Leap work with Xtracycle's child-carrying accessories?
Yes! The Leap is compatible with all Xtracycle family accessories including the Hooptie, Leap U-Tubes, and Magic Carpet.
7. Can I put a child seat on the rack? Yes! The Xtracycle Leap is compatible with Yepp Maxi EasyFit child seats. You'll need to get the Yepp Kids Seat Adapters.
8. What are the best bags for my Leap? We highly recommend the X3 bags with Leap WheelSkirts or X2 bags (retired). More info on the X3 bag system can be found here.
9. Does the Leap work with the Xtracycle SideCar? It does but modifications need to be made. The Leap comes with a tailpiece that curves out toward the end of the bike. This allows the kit to accommodate fat tires. Our other bikes and kits have a tail piece that is flat and goes straight across the back of the bike. To modify the SideCar to fit, you will need to: remove the quill bolts and wedges, saw the quill down the fit inside the Leap tailpiece, drill a hole on the SideCar quill that aligns with the welded boss on the Leap frame, then secure the SideCar onto the frame with a bolt through the welded boss that will also go through the SideCar quill. If you do not have these tools available for such a modification, try reaching out to your bike shop to see if they are able to make the modification themselves.
10. Is the chain extension included with the Leap kits? The Leap kits don’t include the chain extension because there are so many different types of chain that vary greatly in price, speeds. We do have optional Leap length specific chain extensions available on the product page.
11. My bike has V-brakes / cantilever brakes. Can I still install a Leap kit? Ya sure can! The Leap kit will require a disc compatible rear wheel. Simply get your hands on a new or used rear disc-compatible wheel to use on the Leap portion of your cargo bike and keep your original brakes up front. You will then just need to purchase and install the rotor and caliper. Alternately, you could also have non-disc brake posts welded on by a local frame builder/metal shop.
12. Does the Leap support 20" wheels? Yes, a 20" 135 O.L.D. rear disk wheel will fit. Currently we don't have experience with this type of install - a good place to start might be a bike that came natively with a rear 20" wheel like the Cannondale Hooligan. Other modifications would likely be required.
13. If I want to take my 26" mountain bike and put the Leap on, but convert the rear wheel to 20", would there be any issues with that? Currently, we don't have a ready solution. If everything else is kept the same, a 3"+ drop will change geometry, deck slope, steering, etc.
14. Is the angle of the cargo deck shown on www.xtracycle.com/leap directly related the the chain stay angle? Basically, yes. There is some adjustability afforded by the attachment system and depending upon the bike. It is largely driven by the BB drop (CS angle). The photo of the 650b+ grey and orange bike is not necessarily an accurate representation of how the Leap addition will affect geometry.
15. Does the Leap assume a certain BB Drop / CS angle? IE, in order to achieve a level deck, I would assume there is an angle built into the Leap to keep the geometry of the bike fairly consistent while allowing for a level deck? Correct. The challenge comes when you try to make one frame work for 26-29+ frames because the BB drop can vary greatly. Henry Kellogg is working on a calculator that will ultimately inform the boom tube angle.
16. Looks like it's been designed for a mid sized wheel (26"?) and anything smaller or larger will slope the deck aft/fore respectively? Can some "telescoping" be designed in to trim the deck level? Can't help thinking there's a smarter solution though that uses the arc of the Leap frame... have separate drop out for each wheel size (or sliding) with smaller wheels more forward and largest wheel at mid (highest) point of the arc. In the intensive 4+ years of development, we explored many of these directions. With your involvement and ideas, the Leap will continue to improve over time. It turns out to be extraordinarily hard to make it affordable and adaptable to ALL bikes/ideas out of the box. However, you'll find that the Leap Base Kit is highly "hackable" and a fantastic foundation for custom alterations. For deck "slope" it is possible to lift up and clamp the V-racks in the front or rear to make minor adjustments to the deck level (fore/aft). Changing the size of one wheel will change the bike geometry in as-yet-unknown ways.
17. Are frames with a 130mm dropout spacing compatible? It depends. If the O.L.D. can be increased on the wheel, it will fit (change axle, add washers). Most bikes have some ability to flex the chainstays/seatstays so 5mm shouldn't be a problem.
18. What is the make/model of the pictured bike on the Leap product page? It's a Marin Pine Mountain 1.
19. Is the Leap be compatible with kids safety seats, like the Yepp? Absolutely! Use our Yepp Kids Seat Adapters for use with the Yepp Maxi Easyfit seats.
20. Will the Kickback on my FreeRadical work with the Leap? The original KickBack will fit. However, it will need some modifications to match the shape of the boom tube and its spring pins replaced with M4 bolts.
21. How far will the Leap extend my bike's wheel base? There are two mounting positions for the Leap installation. One will extend your wheel base by 1'6". The other will extend your wheel base by 1'3".
Have additional questions about the Leap that weren't answer here? Drop us an email at firstname.lastname@example.org and we'll do our best to answer them!