Geometry, Sizing and Spec: Legacy (retired) bikes

Please note: This information applies to EdgeRunner models Xtracycle no longer sells or manufactures.


Geometry

The E, i and D EdgeRunner models had two frame sizes: Small/Medium (S/M) and Medium/Large (M/L). The difference in the S/M and M/L frame is that the M/L frame is taller and longer. 

These are the recommended rider heights for the different frame sizes:

Small is best for riders: 5'2" - 5'7"

Large is best for riders: 5'7" - 6'3"


EdgeRunner D, i and E Frame Geometry


Small Large
Seat Tube Length
16.5" (420 mm) 19" (482.6 mm)
Top Tube Length
22.7" (575.6 mm)
23.25" (590.7 mm)
Effective Top Tube Length
23.6" (599.5 mm)
24.25" (616 mm)
Head Tube Angle
73 deg. 73 deg.
Seat Tube Angle
72 deg. 72 deg.
Chainstay Length
31.75" (806 mm)
31.75" (806 mm)
Wheelbase
56.25" (1428 mm) 56.9" (1444 mm)
Head Tube Length
5.5" (140 mm) 7" (180 mm)
Fork Length
16.5" (417.5 mm) 16.5" (417.5 mm)
Fork Rake
2.4" (60 mm) 2.4" (60 mm)

Spec

These charts detail all the parts of components that come on each Xtracycle model. Charts will open as PDFs. 

EdgeRunner 24D Spec

EdgeRunner 27D Spec

EdgeRunner 30D Spec

EdgeRunner 11i Spec

EdgeRunner 8e Spec

EdgeRunner 9e Spec

EdgeRunner 10e Spec

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us